CONTACTOMAT CV - with vertical wire feeding

Vertical Contact Wire Feeding

Economical and efficient:

Vertical Contact Welding

Facts and benefits:

• Processing of round wires

• Short and easy changeover

• Scrap-free cutting of the welded wires to the correct length

• Customized solutions from autonomous, semi-automatic or fully automatic systems to complete production lines including punching, bending, thread forming, QA and separation of contact parts

• Simple, reliable and efficient machine and system controls

Operator and service friendly:

Spinning Coining Unit

Facts and benefits:

• NC or cam-controlled, highly precise strip feeders, i.e. freely programmable contact distances within a contact module

  • • Strip positioning directly before and after the welding position results in high positioning accuracy of the welded contacts

  • • Simple and short changeover times of the strip feeders thanks to pre-installed strip guide modules

  • • Water-cooled welding units and strip guides reduce heating or expansion of the strips

  • • Good accessibility, easy to operate and service

  • • Cam-controlled or pneumatic and always synchronous production sequences

  • • Various types and sizes of welding units depending on the application

Reliable and flexible:

Triple Contact Welding

Facts and benefits:

• Proven and operationally reliable components or systems

• Modern welding current controls (e.g. Inverter, AC or DC etc.) incl. monitoring of welding parameters and automatic marking of defective parts

• High cycle rates depending on application

• Up to four welding units can be used per system

• Welding of up to four static contact positions transverse or longitudinal to the strip direction

• Welding of freely programmable contact positions transverse and longitudinal to the strip direction

Customer-specific and quality-optimized:

Round Welded Contacts CV

Facts and benefits:

• Processing of contact diameters from 1.0 mm and contact heights from 0.2 mm

• Processing of strip thicknesses from 0.1 mm and strip widths from 3.0 mm

• Feasibility tests of new material combinations in our own welding laboratory

Weldomat Contact welding vertical CV2-24-34M